3-IN-1 Multi-Purpose Mover with 12×39 Air Beams
$1,569.99 – $1,629.99
Airsled’s ultra-versatile 3-IN-1 Multi-Purpose Mover has a 2,300 lb lifting capacity. This model comes with three 12″W x 39″L air beams but can also be used as a dual-beam system rated for 1,400 lbs or a single beam system rated for 1,000 lbs giving you maximum options. Select your desired model features from the FOUR options below.
To help determine if the 12×39 or 10×48 model is more suitable for your application, please read the description below and view the diagrams in the photo gallery.
The 3-IN-1 Multi-Purpose Mover is designed for maximum versatility and is ideal for loads that have either unusual footprints or uneven weight distribution. When evaluating the 12x39 or 10x48 model, consider the following to ensure optimal performance.
You want to A) Position the air beams so they are centered under the lifting points and/or have as much of the load as possible directly over the air beams, and B) Minimize extension of the front and rear of the air beams past the load. The diagrams in the photo gallery help illustrate these points.
As with all Airsled systems, users may need to reposition the air beams several times to determine the best lifting points (or “sweet spot”) to lift and move the desired load weighing up to 2,300 lbs. For loads with more basic footprints, the system can function with two air beams and is rated to lift 1,400 lbs. The system can even be used as a single air beam solution rated to lift 1,000 lbs. These air beam configuration options greatly increase the range of system capabilities and performance. If you’re not sure if this solution will meet your specific requirements, please contact Airsled and we’ll help you make the right choice.
This model consists of the following:
- Three 12” W x 39” L x 3/16” T air beams made from high-grade US aluminum
- 2,300 lb. lift capacity when configured with three air beams
- 1,400 lb. lift capacity when configured with two air beams
- 1,000 lb. lift capacity when configured with a sing air beam
- 4HP / 12 volt / 11.3 amp blower
- Three 72″ hoses and required connectors to operate as a triple, dual or single air beam system
- Airflow controller to help adjust lifting height
- Six plastic Rough Surface Adapters (RSAs) each 10” W x 36” L
- Six spacer sticks each 2″ W x 32″ L x 1/2″ T
- Shoulder strap for blower
- Two carrying bags for your Airsled system and accessories
- Models without vacuum capability weigh 60 lbs
- Models with vacuum capability weigh 63 lbs
- System ships in two boxes
- Owner’s Manual for 3-IN-1 Multi-Purpose Mover