11 Apr Free!!!!!



Starting tomorrow April 12, 2016 until April 30, 2016. In an effort  to always find ways for our customers to save money, we are giving away FREE SHIPPING when you order one or more of our Standard Appliance Movers  or our Standard Vending Machine Movers. Take advantage of this great opportunity of owning one of the world’s leader load movement system at NO SHIPPING COST!!!

“We are in the hardwood floor business. We use Airsled to move appliances for customers with no damage to hardwood floors that we just finished. Great product.  Would recommend to anybody in the flooring business.”

Jeff Wilson – Wilsons Floor Sanding



Standard Vending Machine Mover with Lifting Capacity of 1,200 pounds!!!


Standard Appliance Mover with Lifting Capacity of 850 pounds!!!


Lifting Heavy Loads has never been this easy…..Give us a call and order yours TODAY!!!!!!!



benAirsledOften times Lean Manufacture Engineers, Mechanical Engineers, and Quality Assurance Managers ask themselves ,
“ Can I move my
10 tons heavy equipment or machinery while keeping the risk of damages or injuries to a minimum?” , “Can I avoid hiring an outside contractor or rigging company without having to pay $25,000 per week?”, “Can we do the heavy lifting and moving job ourselves?”.  The answer is YES. By using Airsled’s heavy equipment movers you can eliminate all your worries. Reduce cost and time required by traditional moving methods.





  • By only using top quality materials along with our exclusive technology, we are able to design and manufacture a custom system specifically for your application. You can move complex and difficult loads without spending a fortune. Airsled® systems floats heavy equipment on a cushion of air.
  • Traditional material handling equipment such as forklifts, hoists or cranes,  can cause severe damage to the load, to your crew and in worst cases even death. Forklifts are unwieldy and require maneuvering space. They require a trained operator and  in plants where you only have combustion powered forklifts it limits you in areas where fumes are not allowed. Forklifts frequently found in production or manufacturing areas can lift loads up to 5,000 pounds this limitation becomes a nightmare for plant engineers when they need to move much heavier equipment. You can use our systems in tight spaces where there is no access to forklifts or even walkie-stackers. Airsled’s heavy equipment movers, help you move your heavy loads in a much safer and efficient way. bruce
  • Our advance technology allows you to slide the “airbeams” under a clearance as low as 0.50 inches, 1.27 centimeters, 12.70 millimeters and still lift loads up to 20,000 pounds and even more This would almost be IMPOSSIBLE with other lifting mechanisms. The possibilities are truly remarkable.
  • Airsled’s® unique systems use low-air-pressure. This allows us to use a low-pressure blower which is why we are the only ones in the industry with the ability to build portable systems without increasing your budget. Unlike the expensive high air pressure lifting systems, Airsled’s® custom designs do not require an air supply line from a compressed vessel (air compressor) to lift and move your load. Some plants cannot afford to lose vital air pressure from their air supply lines, and in some cases they don’t have a compressed air line obligating you to hire an outside contractor.
  • Unlike wheel castors Airsled’s heavy equipment moversare friction-less. This means you can move your heavy loads in and out of tight spaces with easy maneuverability. Our “airbeams” can float over  bolts, nuts, screws, washers, or any other type fasteners and small tools typically found on production and manufacturing floors. It can also go over cracks  and crevices as wide as 1.00 inch (when you have concrete slabs separation).
  • Imagine moving the total weight of a load by using 1 % of force, for example, to move a 5,000 pound equipment you only need 50 pounds of force
    (5000lbs/100= 50lbs of force). Airsled® gives you the possibility of moving a load this heavy with only one person!!! You do not have to sacrifice your productivity anymore.
  •  Some floor surfaces have a limited load rating. This only leaves the option of using a chain hoist or crane, both these options are dangerous and expensive.  The custom designed airbeams reduces the weight of the load by using a simple-in-hindsight example of an automobile that weighs 3,000 pounds with a 100 sq. inches of tire surface in contact with the road, therefore (3,000/100 = 30 psi). 

sled 4


No matter how heavy and difficult your load is, give us a call to find out how Airsled® can help you with a load movement system at an affordable price.


09 Mar How to move heavy appliances without damaging the floor?


The Airsled Appliance Mover is the tool of choice by the appliance installation, appliance repair, floor installers, builders, remodeling,
construction and many other industries. Airsled Appliance Mover makes it easier to deliver, install, service and move heavy appliances
of all shapes and sizes in a much safer way. Here are a few tips we have for you that will come in handy whenever you are handling
these cumbersome pieces of equipment over finished floors.


Before you start using your Picture5Appliance Mover follow these easy steps:

  • Have a plan of action before you start the job.
  • Check the owner’s manual of the appliance to know the weight and dimensions of the appliance you are moving.
  • If you are installing new appliances, make sure you measure the doorways, hallways and staircases before you begin to
    move them.
  • Clean the floor and the bottom of your sleds, clear all debris.
  • Place the sleds in front of the appliance and gently slide them underneath. Make sure you spread them as wide as possible.
  • Turn the blower ON and watch the magic.
  • If you are repairing, servicing, or moving an appliance, first slowly glide it out just enough to reach back and disconnect
    any power lines, gas lines, water supply lines. 
  • Whether you are installing or moving an appliance, make sure you secure all the wires, cords, hoses to the back of the appliance
    with tape to keep them from dragging.
  • Follow the “user-friendly” instructions that comes with your Airsled Appliance Mover .


If you DO NOT have the user instructions, contact us and we will gladly provide them for you.


Moving heavy appliances has never been easier. If you don’t have an Picture5Appliance Mover yet, CLICK HERE to find the model
that fit your needs or give us a call and we will recommend one for you.


Don’t risk damaging your beautiful floor or scratching your expensive appliances, call us now and join the Picture5 movement TODAY!




15 Jan Airsled, Inc. – SAM (System for Award Management) Registration

In an effort to provide Load Movement Solutions to all industries including government agencies, Airsled, Inc. is proud to announce the renewal of our SAM registration. SAM gives Airsled the ability to bid on any project that requires solving a load movement problem. Give us a call today and start enjoying the benefits of using a revolutionary load movement system proudly made in U.S.A.

What is SAM?

The System for Award Management (SAM) is combining federal procurement systems and the Catalog of Federal Domestic Assistance into one new system. This consolidation is being done in phases. The first phase of SAM includes the functionality from the following systems:

* Central Contractor Registry (CCR)
* Federal Agency Registration (Fedreg)
* Online Representations and Certifications Application
* Excluded Parties List System (EPLS)

How will SAM benefit me?

The overarching benefits of SAM include streamlined and integrated processes, elimination of data redundancies, and reduced costs while providing improved capability.

To learn more about SAM: www.sam.gov

Airsled Made In USA

08 Jan Tired of dragging, rocking, scraping, and muscling loads?

Airsled blog pic

Airsled is the worldwide leader in design, production and sales of portable, low-pressure air film technology and air bearing products. This technology has revolutionized heavy load handling, making tasks such as moving appliances and moving heavy machinery easier and safer than they have ever been before.


The secret is placing and keeping a micro-thin cushion of air under the load to then move it almost effortlessly. A heavy load can be moved by a force equal to just 1% of its weight. A small child can easily and safely move a 500 pound load around the room using just one finger.

• Moving Vending Machines
• Moving Appliances
• Moving Heavy Loads
• Lifting Heavy Equipment

The Airsled Load Movement Systems can solve your trickiest moving problems, boost productivity, reduce cost, and improve employee morale…..it’s simply amazing.


Effortless movement is hard to believe, but seeing is believing. Over 600,000 Airsled systems are in use today by plant engineers, maintenance personnel, remodelers, appliance and vending installers and technicians. Join the MOVEMENT today!



28 Sep Airsled Newsletter

Appliance Moving

From stoves to washing machines to large refrigerators, we have solutions that will make moving appliances quick, simple and safe. Airsled has helped organizations of all types – from appliance manufacturers to builders and flooring companies – change the way they move appliances.



Moving Heavy Equipment, Industrial Machinery, ATMs and Office Furniture

Our standard products are used to move all types of appliances, ATMs, vending machines and many types of equipment, furniture and safes. When it comes to moving machinery, our customers very often require custom solutions. As the only company in the industry to offer low pressure custom industrial pressure solutions, we specialize in meeting these unique needs. Contact us at 1-800-247-7533 to learn more.

70-A ALEPH DRIVE, NEWARK, DE, USA 19702 – AIRSLED@AIRSLED.COM – 1-800-247-7533